10" Fluted Column Wrap
Fluted, Non-Tapered PVC Column Wrap Kit. The actual shaft size is 9 ⅜" square. This Column comes flat packed with adhesive, installation cleats and the Cap and Base. The Column shaft is made from 4 pieces of 1/2" thick PVC with a lock mitered edge for easy glue assembly.
Column Installation Tips & FAQs
Find helpful tips, specifications and installation advice on how to install our Columns. Read through the instructions to see if this is the right product for you.
Fluted, Non-Tapered PVC Column Wrap Kit. The actual size is 9 ⅜" x 9 ⅜", This Column comes flat packed with adhesive, installation cleats and all the parts precut for a Box Cap and Base (as shown). The Column shaft is made from 4 pieces of 1/2" thick PVC with a lock mitered edge for easy glue assembly . The inside dimension is 8 ⅜" square. The box cap and base is 7 ¼” high at the bottom (to accommodate a railing) and 3 ⅝" high at the top. The Box Cap and Base are 3/4" thick, adding 1 1/2" inches to the thickness of the shaft, making it 10 ⅞” square.
As a standard, our 10" columns come with six flutes that are equally spaced across the face of the column shaft. When it comes to the length of the flutes, there are several measurements to take into consideration. Ideally, we do not cut into the flutes or allow too much space either above or below the flutes. This Column Package includes a Box Cap that is 3 ⅝” high; for columns 4 to 6 feet high, the base is also 3 ⅝” high; and for columns 8 feet or higher, the Box Base is 7 ¼” tall.
Custom Fluting Form Flute Spacing
This PVC Fluted Wrap comes with a Box or Craftsman cap and base. As an option, you may choose or Box Base and a Georgian Capital or a Tuscan Cap & Base Set. Both come with an Astragal. Whichever capital or base you choose, we customize the flute lengths to start 2" above and below whichever capital or base you choose. At no charge, we can cut down the column shaft to any height.
We make Fluted PVC Columns up to 24" square and 20 feet high with no visible seams!
As columns are made to order, they must be prepaid prior to production and there are no refunds or exchanges.
Production Time1-2 weeks
Shipping CostFree Shipping Special on columns up to 9 feet tall. Call for transport rates on columns over 9 ft. long.
Limitations to our Shipping Specials
Choose Capital & Base SetBox Capital & Base (or Craftsman), Georgian Cap & Astragal, with Box Base, Tuscan Cap & Base with Astragal
Height10" x 10” x 6', 10" x 10” x 8', 10" x 10” x 9' (one-section), 10" x 10” x 9' (two-section), 10" x 10” x 10', 10" x 10” x 12'
COLUMN FREQUENTLY ASKED QUESTIONS
Are you the manufacturer?
Elite Trimworks does produce most of our interior columns and most exterior columns. We specialize in manufacturing PVC Columns.
Are your columns load bearing?
Yes, all of our round wood and Fiber Cast columns are load bearing. Refer to website for the load bearing capability of the desired column.
If my wood columns are split, what type of adhesive do I need to reassemble them?
To reassemble a split column, a high quality wood glue adhesive should be used. This product can be found at any hardware or construction-supply provider.
How do I secure a split column to a wooden or metal post?
Depending on your application, there are several ways to hold a column in place when used for decoration purposes only. One of the most common ways to hold a column in place is to use standard "L" brackets on the bottom and top of the column's shaft. The Tuscan Base and Capital hide this method of installation. If being assembled around a wooden post, a common way to secure the column is by using wood shims. The shims should fit snugly between the column shaft and the post for proper stability. Be sure to visit our website for further column installation instructions.
Can I trim my columns to a lower height?
Yes. If it is a non-tapered column, 1/3 of the shaft height can be trimmed without affecting the fit of the base and capital. Trimming must take place from the bottom of the shaft only!
How are the columns shipped?
Columns measuring up to 8 feet are shipped using UPS. Any column longer than 8 feet must be shipped using a common carrier (Tractor Trailer) and different shipping rates apply.
What happens if my columns arrive damaged?
Depending on shipping method, different rules apply. For instance we do not allow UPS shipments to be refused. For transport shipments, it needs to be indicated on the Bill of Lading (BOL) and we need to be contacted right away. For complete details please see our Terms & Conditions
Is Elite Trimworks competitive with their pricing?
You bet ya! Our 20,000 square foot warehouse allows us to buy in volumes. Half of the columns we sell are made in-house and we pass on the savings to you. We are confident that our prices are some of the best out there. Give us a call and find out for your self.
Can I install the columns myself or will I need a contractor?
Columns less than 9 feet are easy to manage for proper installation if you are handy with basic tools required. Our website has downloadable instructions for installation. Columns over 9 feet high are best managed with the assistance of an experienced contractor.
Can columns go around poles and beams?
Any column is capable of being split in order to accommodate your design. The rules are as follows: Round Beams take overall diameter; Square Beams, take diagonal measurement from top to determine width. Refer to our specs for inside clearance of the shaft to determine proper size column needed.
Do capital and base add any height to the column?
When you order a round wood column the capital and base are factored into the overall finished height of the column. When ordering the Fiber Cast columns, the capital and base are pieces that fit around the column (see image below) and so they do not play a part in adding height to the finished column.
Are the capitals load bearing?
Decorative capitals are strictly for decorative purposes and are not load bearing. The wood or MDF capitals that come standard with the wooden columns are load bearing.
Are your exterior columns insect and decay resistant?
All our exterior columns are engineered and tested to warrant against damage caused by exterior elements.
How are the columns approved for load?
All of our columns come with full strength and material testing provided from our local material testing facility and engineer, see individual products for exact load bearing data.
How wide should the column shaft be?
The width of columns are calculated in terms of a ratio between the base diameter of the shaft and the height. If you where looking for architecturally accuracy, a Tuscan or Doric column should be seven diameters high, an Ionic column, eight diameters high and a Corinthian column nine diameters high. For more on the “Orders of Architecture” go to www.en.wikipedia.org/wiki/Classical_order#Tuscan_order
How should I paint my interior columns?
Bulls Eye 1-2-3®i (see site for complete details) a whole house, universal interior/exterior, water-base stain-killing primer-sealer. Excellent adhesion to glossy surfaces, including tile and enamelled trim. Low odour and easy-to-apply with great flow and levelling. Breathable, flexible acrylic formula resists blistering and peeling. This primer generally dries and is ready to expect paint within the hour.
Why should I discuss my project with you?
Speaking with us will ensure that you are getting the correct column for the job, our years of experience may prevent you from making costly errors.