14" Recessed Panel, PVC Column Mega Wrap
14" x 14" Large, Square, RECESSED PANELLED, Non-Tapered, PVC Column - This Column Wrap is probably the best value you'll find on the net at any size! -- Our large, Elite series, PVC Column Wraps are quick and easy to install as well as lightweight, strong and paintable.
We believe that exterior PVC Column Wraps are the highest quality product for the least amount of cost. These columns are environmentally friendly and can be free standing or easily installed over an existing wooden or steel post. They hold up to warping, shrinkage, decay, insects and they don't ever need to be painted.
-
Column Installation Tips & FAQs
Find helpful tips, specifications and installation advice on how to install our Columns. Read through the instructions to see if this is the right product for you.
14" x 14" Large, Square, RECESSED PANELLED, Non-Tapered, PVC Column
This Column Wrap is Probably the best value you'll find on the net at any size! -- Our large, Elite series, PVC Column Wraps are quick and easy to install as well as lightweight, strong and paintable. They hold up to warping, shrinkage, decay, insects and they don't need to be painted. Our PVC wraps are made with premium "Free Rise" cellular PVC. The shaft is shipped in several sections to be assembled on site. All you need is some ladders, a chop saw and basic carpentry tools to install. These columns are available up to 20 feet tall with no visible seams.
Specifications
The column shaft is made from 4-- Recessed PVC panels, about 1" thick with a lock miter joint for easy glue assembly as shown on the drawing. The actual outside dimension of the shaft is 13 ⅞” and the inside dimension is about 12” square.
The 1 ½" thick Contemporary PVC Base adds about 3" inches of thickness to the shaft making the overall footprint 17”.
Our Elite Tall PVC Column Series includes a Georgian Capital which is made from a 3" to 5" PVC Cornice (depending on the height). Columns over 18 feet come with an astragal to hide the seam of the capital which fits on top of the shaft.
The Premium PVC Base is about 1 ½" thick and 8" tall for columns up to 16 feet and 12" tall for columns 18 and 20 feet tall.
Columns come with a middle panel divider taped in place to be optionally glued in on-site. Columns over 12 feet tall require the divider to be installed in order to hide the seam in the panelled section. Comes complete with 6 - 8 oz of PVC adhesive, tape, installation cleats, and instructions.
>Large PVC Column Photo Gallery >Capital & Base Drawings
Options
A Tuscan capitol and base set
Columns can also be ordered as a pilaster to go up against a wall, at 60% the cost of the full column.
Matches perfectly with the PVC Recessed Panel Newel Post
-
Production TimeMade to order, please allow 2-4 weeks
-
Tarrif Code3925.90.0000
-
Shipping CostCall for a competitive transport shipping quote.
Limitations to our Shipping Specials -
Height8ft, 10ft, 12ft, 14ft, 16ft, 18ft, 20ft
COLUMN FREQUENTLY ASKED QUESTIONS
Are you the manufacturer?
Elite Trimworks does produce most of our interior columns and most exterior columns. We specialize in manufacturing PVC Columns.
Are your columns load bearing?
Yes, all of our round wood and Fiber Cast columns are load bearing. Refer to website for the load bearing capability of the desired column.
If my wood columns are split, what type of adhesive do I need to reassemble them?
To reassemble a split column, a high quality wood glue adhesive should be used. This product can be found at any hardware or construction-supply provider.
How do I secure a split column to a wooden or metal post?
Depending on your application, there are several ways to hold a column in place when used for decoration purposes only. One of the most common ways to hold a column in place is to use standard "L" brackets on the bottom and top of the column's shaft. The Tuscan Base and Capital hide this method of installation. If being assembled around a wooden post, a common way to secure the column is by using wood shims. The shims should fit snugly between the column shaft and the post for proper stability. Be sure to visit our website for further column installation instructions.
Can I trim my columns to a lower height?
Yes. If it is a non-tapered column, 1/3 of the shaft height can be trimmed without affecting the fit of the base and capital. Trimming must take place from the bottom of the shaft only!
How are the columns shipped?
Columns measuring up to 8 feet are shipped using UPS. Any column longer than 8 feet must be shipped using a common carrier (Tractor Trailer) and different shipping rates apply.
What happens if my columns arrive damaged?
Depending on shipping method, different rules apply. For instance we do not allow UPS shipments to be refused. For transport shipments, it needs to be indicated on the Bill of Lading (BOL) and we need to be contacted right away. For complete details please see our Terms & Conditions
Is Elite Trimworks competitive with their pricing?
You bet ya! Our 20,000 square foot warehouse allows us to buy in volumes. Half of the columns we sell are made in-house and we pass on the savings to you. We are confident that our prices are some of the best out there. Give us a call and find out for your self.
Can I install the columns myself or will I need a contractor?
Columns less than 9 feet are easy to manage for proper installation if you are handy with basic tools required. Our website has downloadable instructions for installation. Columns over 9 feet high are best managed with the assistance of an experienced contractor.
Can columns go around poles and beams?
Any column is capable of being split in order to accommodate your design. The rules are as follows: Round Beams take overall diameter; Square Beams, take diagonal measurement from top to determine width. Refer to our specs for inside clearance of the shaft to determine proper size column needed.
Do capital and base add any height to the column?
When you order a round wood column the capital and base are factored into the overall finished height of the column. When ordering the Fiber Cast columns, the capital and base are pieces that fit around the column (see image below) and so they do not play a part in adding height to the finished column.
Are the capitals load bearing?
Decorative capitals are strictly for decorative purposes and are not load bearing. The wood or MDF capitals that come standard with the wooden columns are load bearing.
Are your exterior columns insect and decay resistant?
All our exterior columns are engineered and tested to warrant against damage caused by exterior elements.
How are the columns approved for load?
All of our columns come with full strength and material testing provided from our local material testing facility and engineer, see individual products for exact load bearing data.
How wide should the column shaft be?
The width of columns are calculated in terms of a ratio between the base diameter of the shaft and the height. If you where looking for architecturally accuracy, a Tuscan or Doric column should be seven diameters high, an Ionic column, eight diameters high and a Corinthian column nine diameters high. For more on the “Orders of Architecture” go to www.en.wikipedia.org/wiki/Classical_order#Tuscan_order
How should I paint my interior columns?
Bulls Eye 1-2-3®i (see site for complete details) a whole house, universal interior/exterior, water-base stain-killing primer-sealer. Excellent adhesion to glossy surfaces, including tile and enamelled trim. Low odour and easy-to-apply with great flow and levelling. Breathable, flexible acrylic formula resists blistering and peeling. This primer generally dries and is ready to expect paint within the hour.
Why should I discuss my project with you?
Speaking with us will ensure that you are getting the correct column for the job, our years of experience may prevent you from making costly errors.