Flexible Shaker Casing with Backband
Flexible Shaker (or Beveled Step) Casing with Built in Backband, 3 ¼" wide x 1 ⅛" thick, priced per foot. A popular profile for us, Metrie and Fairbank. Made from flexible polyurethane resin, this casing is perfect for arched windows and doorways. Our flexible material can be painted or stained on site to suit any design need.
* Required Minimum 6' quantity
-
Help Finding and Installing Flexible Moulding
Find helpful tips below and look through our available catalogues. Find the matching profile for your project, with over 5000 profiles available you are likely to find a perfect match.
Flexible Shaker (or Beveled Step) Casing with Built in Backband, 3 ¼" wide x 1 ⅛" thick, priced per foot. A popular profile for us, Metrie and Fairbank. Made from flexible polyurethane resin, this casing is perfect for arched windows and doorways. Our flexible material can be painted or stained on site to suit any design need.
* Required Minimum 6' quantity
-
Production TimeMade to Order, 3-4 weeks estimated
-
Feet Per Length1
-
Inches3 1/2"
-
Shipping CostFree over $250.00, or $25.00 flat rate for orders less than $250.00
Limitations to our Shipping Specials -
Tarrif Code3925.90.0000
Top Selling DURAFLEX Profiles
Standard Catalogue
Prestige Trims Catalogue
Moulding & Millwork Latest Catalogue 2012
Central Fairbank's Profiles
Rigid, MDF Mouldings
Flexible Photo Gallery
Installation Tips- Range of Flexibility
- Flexible Wainscoting
on Curved Staircases - Templates for Elliptical,
Ovals & Radius Crown - Moulding & Millwork Catalogue 2013
Flexible Moulding Installation Tips
Fastening
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge.
Cutting
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.
Staining
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
Painting
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.
