Flexible Polyurethane Shoe Trim 8 ft.
Flexible Polyurethane Shoe Trim 1 3/16" x 7/16", 8ft long. It can be used for any curved surface. Made from polyurethane resin, this product can be painted or stained.
Help Finding and Installing Flexible Moulding
Find helpful tips below and look through our available catalogues. Find the matching profile for your project, with over 5000 profiles available you are likely to find a perfect match.
Flexible Polyurethane Shoe Trim 1 3/16" x 7/16", 8ft long. It can be used for any curved surface. Made from polyurethane resin, this product can be painted or stained. Contact us should you require a custom length (minimum 6ft length required to order).
To save on costs, maximize the use of the rigid MDF profile and use the flexible equivalent only for the curved portion of the project. The maximum per length we can supply is 12 feet; for orders over 12 feet, it will be made in multiple sections. We stock this profile in 8ft lengths only, but should you require custom lengths, we can have it custom ordered in - please contact our sales department for further information.
We also offer this matching profile in MDF. If your application does not require a tight radius, we would suggest the matching profile in PVC.
Production TimeQuick Ship
Feet Per Length8
Shipping CostFree over $250.00, or $25.00 flat rate for orders less than $250.00
Limitations to our Shipping Specials
Flexible Moulding Installation Tips
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge.
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.
Tall Colonial PVC Shoe Trim
Modern, PVC Shoe Trim
Colonial, PVC Shoe Trim