Square Paint-Grade Wood Columns
Free Shipping Specials

showroom_hp.jpg

Square columns are more common in modern homes and a great alternative to the round columns. Square columns are hollow therefore they are not load bearing, however they do give the illusion of bearing a great weight. Elite Square Column kits come unassembled and can be installed with or without an existing support post, or an existing wall (depending on the widths) it can also stand alone. Our square paint grade columns are also a great add-on to a wide range of our Wainscoting; they can be incorporated into a room where wainscoting is being installed to complete the look. Elite square columns are a perfect match to our Wall Paneled Wainscoting, Flat Panel Wainscoting or our Raised Panel Wainscoting.

Our Square Paint Grade Columns are made from Stain Grade Hardwood, MDF, Pine or Poplar. Custom sized columns are available buy request, call for pricing. We manufacture three basic types of square, wood, interior columns: Smooth, Fluted and Paneled.

Each Square column is handmade and are manufactured using precision machinery and are sanded thoroughly before they leave the shop. Finishing of the column is made easy due to our stringent quality control process which ensures nothing leaves our plant without first being checked over for damage and proper sizing.

These columns are great for hiding jack post in basements. Contractors like using our pre-cut square columns because they are much faster to assemble than drywall and taping. Wood square columns have a more precise look to them as well. All columns are packed flat and are easy to assemble on site. Our lock miter corners make it a snap to nail, pin or glue together. All Elite Square columns are all pre-packed and ready for same day shipping. The Columns are Unprimed and require a coat of Primer and Paint before or after installation. Note: All Column shafts can easily be cut down to size on site.


>Photo Gallery      >FAQ & How to Install        >Flute Sizing      >Matching Wainscot


Per page:
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Titebond III Wood Glue, 2 oz., the best wood we found for bonding MDF.  We include 2 oz. with most of our Square Wood Columns.

    • US$2.00

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    Square, Wood Column Splitting Fee to split any of our wood columns in any of the ways shown on drawing. We will contact you to confirm the sizing of each of the panels before splitting the column shaft. (max 10 ft high)
    • US$20.00

    Score: 5.00 (votes: 2)
  • Drag and drop me to the cart

    One set of recessed panel dividers and astragal to create additional panels for our Recessed Wood columns

    • US$22.00

    Score: 5.00 (votes: 1)
  • Choose the product options first

    This 12" extension turns a 8 foot square column into a 9 foot column. Made from 1/2" MDF to match standard columns. All 4 sides are shipped unassembled complete with the necessary back bracing.  Use the banding trim supplied by 8 foot kits to hide the seam.

    • US$30.00

    Score: 5.00 (votes: 1)
  • Choose the product options first

    The column shaft or stem is un-primed MDF and is made up of four sides 1/2" thick that go together using our lock mitre joint for easy assembly. The outside dimension is 7 5/8' square and the inside is 6 5/8'. Shipped unassembled so that it can be used to wrap a jack post, lolly post or an existing support.

    FREE SHIPPING SPECIAL! - In the USA limited to the lower 48 states or in Canada within 1 hour of any major Canadian city.

    • US$129.00

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart

    The 6" x 6" x 8ft column un-primed MDF shaft is shipped with 4-- 8 ft sides, unassembled so that it can be used to wrap a jack post, lolly post or an existing support. The shaft is made up of four sides that go together using lock miter joints for easy assembly. We provide installation instructions, water-proof PVC installation cleats, screws, mounting hardware, glue, tape and the material pre-cut for the base and cap to be installed on site. 

    • US$144.00

    Score: 5.00 (votes: 3)
    1
  • Choose the product options first

    Traditional Square, Paint Grade Column - The shaft is made up of four MDF un-primed sides that go together using lock mitre joints for easy assembly. They are unassembled so that they can be used to wrap a jack post, lolly post or an existing support. We provide all the trims shown (pre-cut).

    • US$169.00

    Score: 4.67 (votes: 3)
  • Choose the product options first

    The Tuscan smooth column has a classic look dating back to Roman times, characterized by its wide base. It can stand on its own or it can be wrapped around an opening as a casing to give it a sense of elegance. The shaft is 96" long (8ft).  The outside dimension is 7 ⅝" square and the inside is 6 ⅝" with the panels being ½" thick MDF, to be primed and painted after installation.  The base and cap are made from primed MDF and only suggested for indoor applications.  The base adds 3" making the footprint 10 ⅝ ".  Everything you see in the photograph is cut to size.

    • US$189.00

    Score: 5.00 (votes: 1)
  • Choose the product options first

    Square, Recessed Column

    Square columns are a great alternative to the round columns which are more common. Square columns are hollow and so therefore not load bearing however they do give the illusion of bearing a great weight. All Elite Recessed Paneled Square Column kits come unassembled and can be installed with or without an existing support post, an existing wall, or may stand alone.

    These square columns are a perfect match to our Recessed Wall Paneled Wainscoting. A modern paneled look, characterized by its clean lines. It can stand on its own or it can be wrapped around an opening as a casing to give it a sense of elegance.

    • US$189.00

    Score: 3.00 (votes: 2)
  • Choose the product options first

    Square Half RECESSED PANELED Column made from unprimed MDF, 8 or 9 feet tall. The column shaft is made from four panels that are unassembled, for those of you that would like to use this to wrap around a support or jack post. The shaft goes together like a puzzle, using lock mitre joints for easy assembly. All the smaller pieces do require some assembly. The nine foot version is shipped as a 8 foot, with a one foot extension that is to be assembled on site.   Made to compliment our Elite Recessed Wall Paneled Wainscoting using the same trims and proportions.  It is a classic look that can be easily adapted to suit your varying needs in paint grade MDF

    • US$199.00

    Score: 5.00 (votes: 2)
    1
  • Choose the product options first

    The Traditional Fluted column has a classic look from our colonial past, characterized by its taller, thin base. It can stand on its own or it can be wrapped around an opening as a casing to give it a sense of elegance. The shaft is 96" long (8ft). The outside dimension is 7 ⅝" square and the inside is 6 ⅝" with the shaft panels being ½" thick MDF, to be primed and painted after installation. The base and cap are made from either Poplar or Primed MDF and only suggested for indoor applications. The base adds 3" making the footprint 10 ⅝ ". The capital trim adds 4 ⅜" to the top portion making it 12". The base trim is 5 ½" high. The flutes stop and finish at about 2 ½" from the top and bottom of the shaft as shown.

    The 7' version of this column is also 8' long but the flutes are 12" shorter with the excess to be cut off on site. The 9' version has a 8' shaft with flutes that are 12" longer than the 8' version. The extra foot is shipped separately to be added to the shaft on site. See our Flute Sizing chart chart for complete details.

    • US$269.00

    Score: 5.00 (votes: 1)
  • Choose the product options first

    Square, Wood, Half FLUTED RECESSED PANELED column made from unprimed MDF, 8/9 ft tall, 7 5/8" square, 6 5/8" inside and with 1/2" thick sides. The paneled portion is 38" high, made to compliment our Elite Recessed Wall Paneled Wainscoting using the same trims and proportions. It is a classic look that can be easily adapted to suit your varying needs in paint grade MDF.

    • US$269.00

    Score: 4.67 (votes: 3)
    1
  • Choose the product options first

    The Tuscan FLUTED column has a classic look dating back to Roman times, characterized by its wide base. It can stand on its own or it can be wrapped around an opening as a casing to give it a sense of elegance. The shaft is 96" long (8ft). The outside dimension is 7 ⅝" square and the inside is 6 ⅝" with the shaft panels being ½" thick MDF, to be primed and painted after installation. The base and cap are made from either Poplar or Primed MDF and only suggested for indoor applications. The base adds 3" making the footprint 10 ⅝ ". The capital trim adds 4 ⅜" to the top portion making it 12". The base trim is 5 ½" high. The flutes stop and finish at about 2 ½" from the top and bottom of the shaft as shown.

    The kit includes: 4 - 8ft panels that make up the shaft of the column; 1 architecturally correct Tuscan base; 4 pieces of 3" Georgian crown and banding to create a capital; mounting brackets; tape; and even the MDF glue. Everything you see in the photograph is cut to size. The column is shipped unassembled so that it can be used to wrap a jack post, lolly post or an existing support. The shaft is made up of four sides that go together like a puzzle, using lock mitre joints for easy assembly. All the smaller pieces also require assembly.

    The 7' version of this column is also 8' long but the flutes are 12" shorter with the excess to be cut off on site. The 9' version has a 8' shaft with flutes that are 12" longer than the 8' version. The extra foot is shipped separately to be added to the shaft on site. See our Flute Sizing chart for complete details.

    • US$276.00

    Score: 5.00 (votes: 1)