Pultruded Non-Tapered Fiberglass Columns
Just as Easy to Install as they are to Have Shipped to your Job Site 

Pultruded columns are made by an Pultrusion process and have a look of cast fibreglass columns at a lower cost! The process involves pulling continuous lengths of reinforced polymer, rather than pushing, as in extrusion through a forming die using a continuous pulling device. Resin, fillers and specialized additives are then added to produce a fine finish.

Pultruded Columns can only be made non-tapered. Though these columns look the same as HB&G Fiberglass Columns, they carry only about half of the load bearing capacity or about 5,000 Lbs, which will due for most applications.They are lighter in weight then the equivalent cast columns which makes them easier to ship, carry and install. Another difference between the columns is that the Pultruded columns cannot be split. These Pultruded columns are resistant to chemicals, rot, fading, insects, warping and moisture. Pultruded Fiberglass columns, come with a with a limited lifetime warranty for material and workmanship when properly installed.


Per page:
  • Cut to size fee

    Need a column cut to a specified height prior to shipping? For those who prefer to have the columns cut to size, accuracy is guaranteed to the nearest 1/8”, and Custom Cut columns are non-refundable. 

    Score: 5.00 (votes: 1)
    No reviews.
    • US$26.00
  • 8" Round , Non Tapered Pultruded Column

    Smooth, Non Tapered, Round, Light weight Pultruded Fiberglass Column, complete with Tuscan Base and Cap as shown. We ship each Column with all the necessary Tapcon Screws and mounting hardware. They are manufactured from the most advanced fiberglass in the construction market that makes them to last a lifetime.  

    Not rated yet
    • US$99.84
  • 8" Recessed Fibreglass Column

    8" Recessed Paneled, Square, Light weight Pultruded Fiberglass Column, complete with Box Base and Capital, as well as top and bottom dividers as shown. Please note, middle dividers are available at an additional cost. We ship each Column with all the necessary Tapcon Screws and mounting hardware. They are manufactured from the most advanced fiberglass in the construction market that makes them last a lifetime.  
     
    This column comes with loose panel dividers for the top and bottom of the shaft to be glued in place. This allows for customization of panel sizing. Middle dividers can be added to column for a look of more panels if desired.  Middle dividers must be ordered separately.
     
    Score: 4.75 (votes: 4)
    (2)
    2
    • US$102.96
  • 8" Square Fiberglass Column

    8" Smooth, Non Tapered, Square, Light weight Pultruded Fiberglass Column, complete with a Box Capitol and Base and the necessary Tapcon Screws and mounting hardware. They are manufactured from the most advanced fiberglass in the construction market that makes them to last a lifetime.

    Score: 4.50 (votes: 6)
    (1)
    1
    • US$112.32
  • 6" Square Fiberglass Column

    6" x 6" Smooth, Non Tapered, Square, Pultruded Fiberglass Column, complete with a PVC Box Capital and Base as shown. They are manufactured from the most advanced fiberglass in the construction market that makes them to last a lifetime.

    Score: 4.00 (votes: 2)
    No reviews.
    • US$119.00
  • 10" Square Fiberglass Column

    10" Smooth, Non Tapered, Square, Light weight Pultruded Fiberglass Column, complete with a Box Capitol and Base and the necessary Tapcon Screws and mounting hardware. They are manufactured from the most advanced fiberglass in the construction market that makes them to last a lifetime.

    Score: 5.00 (votes: 1)
    No reviews.
    • US$139.36
  • 10" Recessed Fiberglass Column

    10" Recessed Paneled, Square, Light weight Pultruded Fiberglass Column, complete with Box Base and Capital, as well as top and bottom dividers as shown. Please note, middle dividers are available at an additional cost. We ship each Column with all the necessary Tapcon Screws and mounting hardware. They are manufactured from the most advanced fiberglass in the construction market that makes them last a lifetime.  
     
    This column comes with loose panel dividers for the top and bottom of the shaft to be glued in place. This allows for customization of panel sizing. Middle dividers can be added to column for a look of more panels if desired. Middle dividers must be ordered separately.
     
    See the specifications chart for load bearing capacities and additional sizing information.
    Score: 5.00 (votes: 2)
    No reviews.
    • US$164.32
  • 10" Round , Non Tapered Pultruded Column

    Smooth, Non Tapered, Round, Light weight Pultruded Fiberglass Column, complete with Tuscan Base and Cap as shown. We ship each Column with all the necessary Tapcon Screws and mounting hardware. They are manufactured from the most advanced fiberglass in the construction market that makes them to last a lifetime.

    Score: 5.00 (votes: 1)
    No reviews.
    • US$195.00
  • 12" Square Smooth Permalite Fiberglass Column

    12" Smooth, Non Tapered, Square, Permalite HBG Fiberglass Column, complete with a Box Capitol and Base and the necessary Tapcon Screws and mounting hardware. They are manufactured from the most advanced fiberglass in the construction market that makes them to last a lifetime.

    Not rated yet
    • US$394.16