Showroom closed, we are open Mon-Fri 9 - 5 EST for scheduled pick ups, shipping, and online orders.
PVC Quarter Round
Zoom image

PVC Quarter Round


Score: 5.00 (votes: 2)
  • US$5.50

PVC Quarter Round 5/8” x 5/8”, in white, 8ft long.

Quantity:  
  • NOTICE

    We are currently experiencing a high demand of orders.  Our team is working hard to process all orders, as soon as possible; however, we must maintain safe working standards, along with social distancing measures, to ensure their and your safety are our highest priority.  With that please anticipate delays and longer than normal lead times.  Thank you for your understanding during this challenging time.  Note our Showroom remains closed, we are open Mon-Fri 9 - 5 EST for scheduled pick ups, shipping, orders, our team members are here ready to assist you with your project needs.

  • Vinyl Wainscoting How To

    Detailed installation instructions

  • Weight
    8 lbs
  • SKU
    PVC-Q-8-W

PVC Quarter Round 5/8” x 5/8”, in white, 8ft long.

Due to COVID‑19
OUR SHOWROOM IS NOW CLOSED
 FACTORY, SHIPPING & ONLINE SALES
REMAIN OPENED MONDAY-FRIDAY   


We are currently experiencing a high demand of orders.  Our team is working hard to process all orders, as soon as possible; however, we must maintain safe working standards, along with social distancing measures, to ensure their and your safety are our highest priority.  With that please anticipate delays and longer than normal lead times.  Thank you for your understanding during this challenging time.  Note our Showroom remains closed, we are open Mon-Fri 9 - 5 EST for scheduled pick ups, shipping, orders, our team members are here ready to assist you with your project needs.

INSTALLATION INSTRUCTIONS FOR VINYL WAINSCOTING

“Perfect Finish” Ready-to-Install PVC/Cellular Composite Wainscot * NO PAINTING REQUIRED!

Its made from high strength PVC materials. This material works like wood: cuts, glues or nails. However it will not splinter or crack and has no knots. This product has a lifetime warranty on rot. The product is for interior use only.

Tools:  Mitre Saw or Hand Saw, Hammer, Level, Square, Caulking Gun, Tape Measure, Pencil

[image 1 ]
Additional Materials
Panel Adhesive (PL Premium or No More Nails Tub Surround), 1’’ finishing nails or brad nails (Optional)Installation Tips

Use a quality panel adhesive and follow manufacture’s instructions. When tapping panels into each otheruse a wood block or end cut of one of the panels. Do NOT use the hammer directly on the panel or butt panels too tighly. Allow for normal expansion and contraction (1/32").

For better holding strength angle all nails and drive nails leaving 1/8” above surface and finish using a nailset. When possible nail into moulding groove. This avoids surface damages. For cleaner cut, saw into the finished surface.

When you approach an outlet, turn off the power. Take careful measurements of the outlet location and cut out the opening.

Installation: Base Trim

Measure your wall, if your wall is longer than 8’ pre-mitre the joining end with the next piece of base board you will be using.
[image 7 ]

Make certain the Base Trim has the pre-grooved end up before glueing or nailing. Apply glue in a zig-zag pattern on back of Base Trim and apply to wall. Make sure Base Trim pieces align on the wall
[image 2 & 3 ]

Installation: Panel

The correct installation of the first panel board is the key to an easy and successful installation.

Begin at the left most corner of your installation (opposite if you are left-handed). Each panel is tongue and grooved for a uniform fit and easy installation. Determine which side you want to enhance your room beaded or smooth. Keep the groove edge towards the starting corner. Using a level make sure the first panel is absolutly square. When necessary, scribe and remove material from the panel from the groove

side (inside corner).

[image 4 ]

Next, determine the height you want for your wainscot and cut only if necessary.

[image 5 ]

Do not force fit pieces together. Apply glue on back side of panel place into groove on Base Trim and position into corner.
[image 6 ]

(Optional) Nailing the top, middle and bottom tongue every 16” will ensure better adhesion.Carefully measure and fit next panels. The last panel may also need to be trimmed to fit into the corner.

Installation: Chair Rail

Make sure that all panels are correctly installed.Measure your wall, if your wall is longer than 8’ pre-mitre the joining end with the next piece of Chair Rail you will be using.
[image 7 ] Make certain the Chair Rail has the pre-grooved end down before glueing or nailing.

Apply glue in a zig-zag pattern on back of Chair Rail and apply to wall. Make sure Chair Rail pieces align on the wall.
[image 2 & 3 ]

Maintenance

Cleaning your Vinyl Millwork with a damp cloth makes it look like new.

Customer reviews
Average rating:

Score: 5.00 (votes: 2)
Rating of votes (2)
5
 
2customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
Please sign in to add review
There are no comments yet. Be the first to leave a comment
Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    PVC Beadboard Kit, 36" H, 8 ft

    Score: 4.33 (votes: 6)
    1
    • US$135.00
  • Drag and drop me to the cart
    PVC Beadboard Kit, 52” H, 8 ft

    Score: 5.00 (votes: 4)
    3
    • US$179.00
  • Drag and drop me to the cart
    Flexible Quarter Round 11/16 8 ft.

    Score: 5.00 (votes: 4)
    2
    • US$24.00
  • Drag and drop me to the cart
    PVC Beadboard Rail Kit

    Score: 5.00 (votes: 1)
    • US$45.00
  • Drag and drop me to the cart
    PVC Fill Stick

    Score: 5.00 (votes: 1)
    • US$6.00