12" RECESSED PVC Column Wrap Kit

Score: 4.44 (votes: 9)

Our PVC Square RECESSED PANEL Column Wrap Kit, measuring 12" square. This kit includes a shaft made up of four panels that can be easily cut to the desired size. Our column wraps are designed for effortless installation, boasting a lightweight yet sturdy construction. They are also paintable, allowing you to customize them to match your desired aesthetic. Say goodbye to worries about warping, shrinkage, decay, or insect damage, as our PVC wraps are built to withstand all these challenges. What's more, you won't need to worry about painting them either. Crafted from premium "Free Rise" cellular PVC, our wraps are built to last.

  • US$456.29
USA Only*
  • Column Installation Tips & FAQs

    Find helpful tips, specifications and installation advice on how to install our Columns. Read through the instructions to see if this is the right product for you.

  • SKU
  • Weight
    65 lbs

12" PVC Square RECESSED PANEL Column Wrap
The shaft is shipped in four easy-to-cut-to-size panels. All you need is a chop saw. The deep-panelled divider trim is applied on-site, at any height once the shaft is cut to size. Our Porch Patio Columns are quick and easy to install as well as lightweight, strong and paintable. They hold up to warping, shrinkage, decay, insects and they don't need to be painted. Our PVC wraps are made with premium "Free Rise" cellular PVC. The shaft is shipped in four easy-to-cut-to-size panels. All you need is a chop saw and basic carpentry tools to install.

Our Recessed Panelled PVC columns include innovative adjustable dividers that slide in place on the job site.  You can adjust your panel sizing to fit your railing height or your design preference.  The columns are shipped with four 1” thick panels with big mitred corners that makes the assembly fast, and secure and leaves no visible seams.

Comes complete with 3 oz of PVC adhesive, tape, installation cleats, mounting hardware and instructions.  The column shaft is made from 4 PVC panels with a lock miter joint for easy glue assembly.

Actual outside dimension of the shaft is 11 7/8”, and the inside dimension is 10" square. The ¾" thick PVC box/base adds 1 ½" inches to the thickness of the shaft making the overall footprint 13 ⅜”.  We include our Premier, extra tall box base that is 9” high and a 4 ½” high capital.  For columns 4 to 6 feet high we ship two capitals, both are 4 ½” tall. 

For columns 8 feet or higher, we include a set of middle dividers (4 pieces). The dividers are taped in place but can be installed at any height, to mount railings or suit your decorative preference. For columns 6 feet or shorter, middle dividers are not included but may be purchased additionally.

>PVC Column Photo Gallery

Additional dividers can be ordered separately. Columns 8 feet or longer are shipped with one set.
One foot shaft extension, should the application require the extra height.
A four-foot section of cap base is used as an astragal trim or neck mould.
A Tuscan cap and base set
This column can also be ordered as a newel post to support the railing or made as a pilaster to go up against a wall.
Matches perfectly with the PVC Recessed Panel Newel Post

*Shipping Specials only apply to the lower 48 states.

    • SKU
    • Weight
      65 lbs
  • Production Time
    Made to order, in about 1 week plus transit time
  • Tarrif Code
  • Shipping Cost
    For columns 6 ft or less, Free Shipping*
    Call for a competitive shipping quote for columns over 6 ft. or longer.
    Limitations to our Shipping Specials
  • Size
    12x12 -4ft - Free Shipping*, 12x12 -6ft - Free Shipping*, 12x12 -8ft, 12x12 -10ft, 12x12 -12ft
Non-Tapered PVC Wrap
Installation Tips
Tapered PVC Wrap
Installation Tips
Craftsman PVC Wrap
Installation Tips
Large PVC Columns
Installtions Tips
Installing Exterior Columns
Video   PDF
Installing Square
Permacast Columns
Fiberglass Columns
Installing PVC
Panel Kits

Re-Assembling PVC
Column Shaft

Adding PVC
Column Extention
How to Install HB&G
Porch Posts
Fiberglass Column
Load Bearing Data
All PVC Capital and
Base Specifications

Installing Dividers
on Columns

Installing Box Caps/Bases
on Fiberglass Columns
Painting Tips for
Columns & Cellular PVC
Installing Georgian Bases
on Tapered Columns

 Custom Tapered
Column Form

PVC Trim Warranty

PVC Trim | Sheets
Installation Guide
Help on Choosing
Wood Columns
Wood Columns
Load Bearing Chart
Installing Wood Columns
Installing Round
Stain Grade Columns
Assembling Square Paneled Columns
Covering Posts in Basements
Square Shaft Assembly
Joining Split Wood Columns
Joining Split Fiberglass Columns
Standard Flute Lengths for Columns
Custom Fluted
Column Form

Installing a Split
Column as a Pilaster
Glossary of Terms


Are you the manufacturer?
Elite Trimworks does produce most of our interior columns and most exterior columns.  We specialize in manufacturing PVC Columns.

Are your columns load bearing?
Yes, all of our round wood and Fiber Cast columns are load bearing. Refer to website for the load bearing capability of the desired column.

If my wood columns are split, what type of adhesive do I need to reassemble them?
To reassemble a split column, a high quality wood glue adhesive should be used. This product can be found at any hardware or construction-supply provider.

How do I secure a split column to a wooden or metal post?
Depending on your application, there are several ways to hold a column in place when used for decoration purposes only. One of the most common ways to hold a column in place is to use standard "L" brackets on the bottom and top of the column's shaft. The Tuscan Base and Capital hide this method of installation. If being assembled around a wooden post, a common way to secure the column is by using wood shims. The shims should fit snugly between the column shaft and the post for proper stability. Be sure to visit our website for further column installation instructions.

Can I trim my columns to a lower height?
Yes. If it is a non-tapered column, 1/3 of the shaft height can be trimmed without affecting the fit of the base and capital. Trimming must take place from the bottom of the shaft only!

How are the columns shipped?
Columns measuring up to 8 feet are shipped using UPS. Any column longer than 8 feet must be shipped using a common carrier (Tractor Trailer) and different shipping rates apply.

What happens if my columns arrive damaged?
Depending on shipping method, different rules apply. For instance we do not allow UPS shipments to be refused. For transport shipments, it needs to be indicated on the Bill of Lading (BOL) and we need to be contacted right away. For complete details please see our Terms & Conditions

Is Elite Trimworks competitive with their pricing?
You bet ya! Our 20,000 square foot warehouse allows us to buy in volumes. Half of the columns we sell are made in-house and we pass on the savings to you. We are confident that our prices are some of the best out there. Give us a call and find out for your self.

 Can I install the columns myself or will I need a contractor?
Columns less than 9 feet are easy to manage for proper installation if you are handy with basic tools required. Our website has downloadable instructions for installation. Columns over 9 feet high are best managed with the assistance of an experienced contractor.

Can columns go around poles and beams?
Any column is capable of being split in order to accommodate your design. The rules are as follows: Round Beams take overall diameter; Square Beams, take diagonal measurement from top to determine width. Refer to our specs for inside clearance of the shaft to determine proper size column needed.

Do capital and base add any height to the column?
When you order a round wood column the capital and base are factored into the overall finished height of the column. When ordering the Fiber Cast columns, the capital and base are pieces that fit around the column (see image below) and so they do not play a part in adding height to the finished column.

Are the capitals load bearing?
Decorative capitals are strictly for decorative purposes and are not load bearing. The wood or MDF capitals that come standard with the wooden columns are load bearing.

Are your exterior columns insect and decay resistant?
All our exterior columns are engineered and tested to warrant against damage caused by exterior elements.

How are the columns approved for load?
All of our columns come with full strength and material testing provided from our local material testing facility and engineer, see individual products for exact load bearing data.

How wide should the column shaft be?
The width of columns are calculated in terms of a ratio between the base diameter of the shaft and the height. If you where looking for architecturally accuracy, a Tuscan or Doric column should be seven diameters high, an Ionic column, eight diameters high and a Corinthian column nine diameters high. For more on the “Orders of Architecture” go to www.en.wikipedia.org/wiki/Classical_order#Tuscan_order

 How should I paint my interior columns?
Bulls Eye 1-2-3®i (see site for complete details) a whole house, universal interior/exterior, water-base stain-killing primer-sealer. Excellent adhesion to glossy surfaces, including tile and enamelled trim. Low odour and easy-to-apply with great flow and levelling. Breathable, flexible acrylic formula resists blistering and peeling. This primer generally dries and is ready to expect paint within the hour.

Why should I discuss my project with you?
Speaking with us will ensure that you are getting the correct column for the job, our years of experience may prevent you from making costly errors.

Customer reviews
Average rating:
4.44 (Votes: 9)
Rating of votes (9)
Please sign in to add review
  • John K
    Aug 11, 2020, 08:21 AM
    Excellent product. Exceeded expectations. Wrapped 2 pillars at end of driveway. Pre built in garage and slid them over. All materials included. Will def return for future needs.

Related products