10" Recessed Fiberglass Column

Score: 5.00 (votes: 5)
No reviews.
10" Recessed Paneled, Square, Pultruded Fiberglass Porch Column, complete with Box Base and Capital, as well as top and bottom dividers as shown. Please note, middle dividers are available at an additional cost. We ship each Column with all the necessary Tapcon Screws and mounting hardware. They are manufactured from the most advanced fibreglass in the construction market which makes them last a lifetime.  

  • US$291.54
Quantity:  
OR
  • Column Installation Tips & FAQs

    Find helpful tips, specifications and installation advice on how to install our Columns. Read through the instructions to see if this is the right product for you.

  • SKU
    P-REC-10-8-BOX-N
10" Recessed Paneled, Square, Pultruded Fiberglass Porch Column, complete with Box Base and Capital, as well as top and bottom dividers as shown. Please note, middle dividers are available at an additional cost. We ship each Column with all the necessary Tapcon Screws and mounting hardware. 
 
This column comes with loose panel dividers for the top and bottom of the shaft to be glued in place. This allows for the customization of panel sizing. Middle dividers can be added to the column for a look of more panels if desired. Middle dividers must be ordered separately.  The dividers, capital and base are to be glued in place with construction adhesive which is not included.
 

The Specifications for the various caps and bases are as follows:

 

Shaft only

with Box Cap / Base

with Tuscan Cap / Base

with Tuscan Cap / Cap

Top Footprint

9 3/8"

10 7/8”

12 ⅛"

12 ⅛"

Bottom Footprint

9 3/8"

10 7/8"

12 ¾"

12 ⅛"

Cap Height

n/a

3 ⅝"

3”

3”

Base Height

n/a

7 ¼"

4 ½"

n/a

Permalite Installation Instructions         Specifications & Load Bearing Data

The astragal or neck moulding can be ordered separately if desired.

    • SKU
      P-REC-10-8-BOX-N
  • Production Time
    Approx 1-5 days
  • Tarrif Code
    3925.90.0000
  • Shipping Cost
    Contact us for a quote
    Limitations to our Shipping Specials
  • Capital & Base Set
    Box, Tuscan
  • Extra divider for center panel
    No, Yes
  • Height
    4ft, 6ft, 8ft, 9ft, 10ft, 12ft
square_pvc_smooth.jpg
Non-Tapered PVC Wrap
Installation Tips
recessed_tapered.jpg
Tapered PVC Wrap
Installation Tips
craftsman8th.jpg
Craftsman PVC Wrap
Installation Tips
thumbnail_large_pvc_column
Large PVC Columns
Installtions Tips
fibre_how_to.jpg
Installing Exterior Columns
Video   PDF
install_squarepermacast_columns
Installing Square
Permacast Columns
install_porchpost.jpg
Installing
Fiberglass Columns
pvc-panel-addon-t.png
Installing PVC
Panel Kits

Re-Assembling PVC
Column Shaft

Adding PVC
Column Extention
install_porchpost.jpg
How to Install HB&G
Porch Posts
install_porchpost.jpg
Fiberglass Column
Load Bearing Data
CAPS_BASES
All PVC Capital and
Base Specifications

Installing Dividers
on Columns

Installing Box Caps/Bases
on Fiberglass Columns
painting_tip
Painting Tips for
Columns & Cellular PVC
Installing Georgian Bases
on Tapered Columns
 

 Custom Tapered
Column Form
 

PVC Trim Warranty

PVC Trim | Sheets
Installation Guide
wood_columnT.png
Help on Choosing
Wood Columns
load_thumb.jpg
Wood Columns
Load Bearing Chart
col_how_to.jpg
Installing Wood Columns
wood_col_how2.jpg
Installing Round
Stain Grade Columns
installing_paneled_columns.png
Assembling Square Paneled Columns
basement_post_thumb.jpg
Covering Posts in Basements
Sq_HP_Kit.jpg
Square Shaft Assembly
column_split_th.png
Joining Split Wood Columns
column_splits.jpg
Joining Split Fiberglass Columns
order_flutes.jpg
Standard Flute Lengths for Columns
Custom Fluted
Column Form


Installing a Split
Column as a Pilaster
ColumnGlossary.jpg
Glossary of Terms

COLUMN FREQUENTLY ASKED QUESTIONS

Are you the manufacturer?
Elite Trimworks does produce most of our interior columns and most exterior columns.  We specialize in manufacturing PVC Columns.

Are your columns load bearing?
Yes, all of our round wood and Fiber Cast columns are load bearing. Refer to website for the load bearing capability of the desired column.

If my wood columns are split, what type of adhesive do I need to reassemble them?
To reassemble a split column, a high quality wood glue adhesive should be used. This product can be found at any hardware or construction-supply provider.

How do I secure a split column to a wooden or metal post?
Depending on your application, there are several ways to hold a column in place when used for decoration purposes only. One of the most common ways to hold a column in place is to use standard "L" brackets on the bottom and top of the column's shaft. The Tuscan Base and Capital hide this method of installation. If being assembled around a wooden post, a common way to secure the column is by using wood shims. The shims should fit snugly between the column shaft and the post for proper stability. Be sure to visit our website for further column installation instructions.

Can I trim my columns to a lower height?
Yes. If it is a non-tapered column, 1/3 of the shaft height can be trimmed without affecting the fit of the base and capital. Trimming must take place from the bottom of the shaft only!

How are the columns shipped?
Columns measuring up to 8 feet are shipped using UPS. Any column longer than 8 feet must be shipped using a common carrier (Tractor Trailer) and different shipping rates apply.

What happens if my columns arrive damaged?
Depending on shipping method, different rules apply. For instance we do not allow UPS shipments to be refused. For transport shipments, it needs to be indicated on the Bill of Lading (BOL) and we need to be contacted right away. For complete details please see our Terms & Conditions

Is Elite Trimworks competitive with their pricing?
You bet ya! Our 20,000 square foot warehouse allows us to buy in volumes. Half of the columns we sell are made in-house and we pass on the savings to you. We are confident that our prices are some of the best out there. Give us a call and find out for your self.

 Can I install the columns myself or will I need a contractor?
Columns less than 9 feet are easy to manage for proper installation if you are handy with basic tools required. Our website has downloadable instructions for installation. Columns over 9 feet high are best managed with the assistance of an experienced contractor.

Can columns go around poles and beams?
Any column is capable of being split in order to accommodate your design. The rules are as follows: Round Beams take overall diameter; Square Beams, take diagonal measurement from top to determine width. Refer to our specs for inside clearance of the shaft to determine proper size column needed.

Do capital and base add any height to the column?
When you order a round wood column the capital and base are factored into the overall finished height of the column. When ordering the Fiber Cast columns, the capital and base are pieces that fit around the column (see image below) and so they do not play a part in adding height to the finished column.

Are the capitals load bearing?
Decorative capitals are strictly for decorative purposes and are not load bearing. The wood or MDF capitals that come standard with the wooden columns are load bearing.

Are your exterior columns insect and decay resistant?
All our exterior columns are engineered and tested to warrant against damage caused by exterior elements.

How are the columns approved for load?
All of our columns come with full strength and material testing provided from our local material testing facility and engineer, see individual products for exact load bearing data.

How wide should the column shaft be?
The width of columns are calculated in terms of a ratio between the base diameter of the shaft and the height. If you where looking for architecturally accuracy, a Tuscan or Doric column should be seven diameters high, an Ionic column, eight diameters high and a Corinthian column nine diameters high. For more on the “Orders of Architecture” go to www.en.wikipedia.org/wiki/Classical_order#Tuscan_order

 How should I paint my interior columns?
Bulls Eye 1-2-3®i (see site for complete details) a whole house, universal interior/exterior, water-base stain-killing primer-sealer. Excellent adhesion to glossy surfaces, including tile and enamelled trim. Low odour and easy-to-apply with great flow and levelling. Breathable, flexible acrylic formula resists blistering and peeling. This primer generally dries and is ready to expect paint within the hour.

Why should I discuss my project with you?
Speaking with us will ensure that you are getting the correct column for the job, our years of experience may prevent you from making costly errors.

Customer reviews
Average rating:
5.00 (Votes: 5)
Rating of votes (5)
5
 
5customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Related products