Elite RAISED Panel Wainscoting Kit, 37" high x 8ft long, in Paint Grade, which is a good height for rooms with either 8ft or 9ft ceilings. This kit is suitable for an overall wainscot height of between 37" and 42". Over 37" high can be accomplished with the Wainscot Base Extension Kit. We also offer a Stair Kit, to make wainscoting your home easier than ever.The kit consists of everything you need to cover 8 linear feet of wall:
1 x Wainscot FJ Poplar Cap, with 5/8" backset, 8ft
1 x Reversible Wainscot Upper Rail, 8ft
1 x X-Lower Rail, 8ft
1 x PVC Shoe Trim, 8ft
5 x 24" Standard X-Stile
4 x 24" x 24" Raised Panel (Shaped), 1/2" thick
This kit is suitable for an overall wainscot height of between 37" and 42". Over 37" high can be accomplished with the Wainscot Base Extension Kit. We also offer a Stair Kit, to make wainscoting your home easier than ever.
All parts are packed with protective packaging and ready to go for quick shipping. The rails and stiles are made from Primed MDF, and the panels are made from unprimed MDF. The Cap Trim is made from Primed FJ Poplar, and the Shoe Trim is made from PVC, both for better impact and moisture resistance.
What makes this system truly customizable is the fact that the panels are generously over-sized to fit any job. It is next to impossible to accurately measure the width and then have the panels cut accurately by others. Cutting the panels on site eliminates the risk of errors and the delays of reordering. We allow generous sizing so that you may cut off what you don't need, shape and prime on the job site to suit any layout. Don't forget, you will need the Freud 99-519 Router Bit to shape the panels on site.
New and improved since 2016 with a taller Cap Trim. For those customer who ordered this kit previously from 2002 to 2016, contact us and we'll help match up to the older system.