Complete Pre-Finished Wainscoting Kit, 8 ft high made with Polyester Laminate. This laminate is basically the same as what is used for laminate flooring. It has the same impact resistance and is also resistant to harsh cleaning agents and other chemicals. The kit comes with everything you need to cover 8 running feet at the full wall height. Choose between three quick ship finishes: Cherry Blossom, Prestige Maple and Tuxedo. As the panels can easily trimmed on site, laying out equally spaced panels has never been easier.
What's included: One length of lower rail, cap trim with mid-rail combination, upper rail, and 2 shoe trims. The rails have a back-set to accept the panels perfectly. The following panels are included: 3 panels with 4 pre-cut stiles 24” high and for the upper portion and 3 panels and 4 stiles 53" high, 6 in total as shown. All panels are about 30” wide and made from 1/4" sheets of Tasfia Board. This system does not require base trim, but you may add if you choose.
The panels can be easily cut on a portable table saw, on the job site to suit any layout. This kit is suitable for an overall wainscot height of eight feet. You don't need to cut the height of the panels (they are pre-cut for 8' high walls) only the width may have to be trimmed. If your application calls for cornice, simply trim either the panels or rails to suit.
*Actual length is 95”. For parcel shipping purposes, the maximum length we can ship is 95”.