8" RECESSED PVC Column Wrap Kit

Score: 5.00 (votes: 2)
  • US$187.00

8" x 8"  PVC Square RECESSED PANEL Column Wrap KIt  The shaft is shipped in four easy to cut-to-size panels. Our PVC column wraps are quick and easy to install as well as lightweight, strong and paintable. They hold up to warping, shrinkage, decay, insects and they don't need to be painted. Our PVC wraps are made with premium "Free Rise" cellular PVC. 

  • Installation Tips & FAQs

    Find helpful tips, specifications and installation advice on how to install our columns. Read through the instructions to see if this is the right product for you.

  • Weight
    65 lbs
  • SKU

8" x 8" PVC Square RECESSED PANEL Column Wrap Kit
The shaft is shipped in four easy to cut-to-size panels. All you need is a chop saw. The deep paneled divider trim is applied on site, at any height once the shaft is cut to size. Our PVC column wraps are quick and easy to install as well as lightweight, strong and paintable. They hold up to warping, shrinkage, decay, insects and they don't need to be painted. Our PVC wraps are made with premium "Free Rise" cellular PVC. 

Our Recessed Panelled PVC columns include innovative adjustable dividers that slide in place on the job site.  You can adjust your panel sizing to fit your railing height or your design preference.  The columns are shipped with four 1” thick panels with big mitred corners that makes the assembly fast, secure and leaves no visible seams.

The Recessed Panel Column Kit comes complete with: the Column Shaft; Box capital and Base set; 3 oz of PVC adhesive, tape, installation cleats, mounting hardware and instructions.
The column shaft is made from 4 PVC panels with a lock miter joint for easy glue assembly.
Actual outside dimension of the shaft is 7 ⅝” and the inside dimension is 5 ⅞" square. The ¾" thick PVC box / base adds 1 ½" inches of thickness of the shaft making the overall footprint 9 ¼”.  This package includes box capital that is 3 ¾” high and the base that is 6 ½” tall. 

Note regarding our 9 foot column: Typically, the capital and base wraps around the column shaft, In order send ship our 9 foot column by UPS, the eight foot (94") shaft sits on top the base.  The capital and base are both taller to give you a combined height of 9 feet.

For columns 8 feet or higher, we include a set of middle dividers (4 pieces). The dividers are taped in place but can be installed at any height, to mount railings or suit your decorative preference. For columns 6 feet or shorter, middle dividers are not included but may be purchased additionally.

>PVC Column Photo Gallery         >Capital & Base Drawings

Additional dividers can be ordered separately. Columns 8 feet or longer are shipped with one set.
One foot shaft extension, should application require the extra height.
A four foot section of cap base which is used as an astragal trim or neck mould.
A Tuscan capital and base set
This column can also be ordered as a newel post to support railing or made as a pilaster to go up against a wall.

  • Production Time
    Quick Ship
  • Tarrif Code
  • Shipping Cost
    For columns 8 ft or less: FREE SHIPPING! *
    Call for a competitive shipping quote for columns over 8 feet. long.
    Limitations for USD Shipping Specials
    Limitations for CAD Shipping Specials
  • Height
    8x8 x 4ft - Free Shipping*, 8x8 x 6ft - Free Shipping*, 8x8 x 8ft - Free Shipping*, 8x8 x 9ft Two Piece - Free Shipping*, 8x8 x 9ft One Piecee, 8x8 x 10ft, 8x8 x 12ft
Customer reviews
Average rating:

Score: 5.00 (votes: 2)
Rating of votes (2)
Please sign in to add review
There are no comments yet. Be the first to leave a comment

Non-Tapered PVC Wrap Installation Tips

Download PDF

Tapered PVC Wrap Installation Tips

Download PDF

Craftsman PVC Wrap Installation Tips

Download PDF

Installing PVC Panel Kits

Download PDF

Help on Choosing Wood Columns

Wood Columns Load Bearing Chart

Install Wood Columns

Installing Stain Grade Columns

Assembling Square Paneled Columns

Covering Posts in Basements

Installing Square Post Covers/ Columns

Square Shaft Assembly

Joining Split Wood Columns

Joining Split Fiberglass Columns
Joining a Split Column as a Pilaster

Flutes, Square Wood Columns
Flutes, Round Wood Columns

Installing Exterior Columns
Video    PDF

Glossary of Terms


Are you the manufacturer?
Elite Trimworks does produce most of our interior columns and most exterior columns.  We specialize in manufacturing PVC Columns.

Are your columns load bearing?
Yes, all of our round wood and Fiber Cast columns are load bearing. Refer to website for the load bearing capability of the desired column.

If my wood columns are split, what type of adhesive do I need to reassemble them?
To reassemble a split column, a high quality wood glue adhesive should be used. This product can be found at any hardware or construction-supply provider.

How do I secure a split column to a wooden or metal post?
Depending on your application, there are several ways to hold a column in place when used for decoration purposes only. One of the most common ways to hold a column in place is to use standard "L" brackets on the bottom and top of the column's shaft. The Tuscan Base and Capital hide this method of installation. If being assembled around a wooden post, a common way to secure the column is by using wood shims. The shims should fit snugly between the column shaft and the post for proper stability. Be sure to visit our website for further column installation instructions.

Can I trim my columns to a lower height?
Yes. If it is a non-tapered column, 1/3 of the shaft height can be trimmed without affecting the fit of the base and capital. Trimming must take place from the bottom of the shaft only!

How are the columns shipped?
Columns measuring up to 8 feet are shipped using UPS. Any column longer than 8 feet must be shipped using a common carrier (Tractor Trailer) and different shipping rates apply.

What happens if my columns arrive damaged?
Depending on shipping method, different rules apply. For instance we do not allow UPS shipments to be refused. For transport shipments, it needs to be indicated on the Bill of Lading (BOL) and we need to be contacted right away. For complete details please see our Terms & Conditions

Is Elite Trimworks competitive with their pricing?
You bet ya! Our 20,000 square foot warehouse allows us to buy in volumes. Half of the columns we sell are made in-house and we pass on the savings to you. We are confident that our prices are some of the best out there. Give us a call and find out for your self.

 Can I install the columns myself or will I need a contractor?
Columns less than 9 feet are easy to manage for proper installation if you are handy with basic tools required. Our website has downloadable instructions for installation. Columns over 9 feet high are best managed with the assistance of an experienced contractor.

Can columns go around poles and beams?
Any column is capable of being split in order to accommodate your design. The rules are as follows: Round Beams take overall diameter; Square Beams, take diagonal measurement from top to determine width. Refer to our specs for inside clearance of the shaft to determine proper size column needed.

Do capital and base add any height to the column?
When you order a round wood column the capital and base are factored into the overall finished height of the column. When ordering the Fiber Cast columns, the capital and base are pieces that fit around the column (see image below) and so they do not play a part in adding height to the finished column.

Are the capitals load bearing?
Decorative capitals are strictly for decorative purposes and are not load bearing. The wood or MDF capitals that come standard with the wooden columns are load bearing.

Are your exterior columns insect and decay resistant?
All our exterior columns are engineered and tested to warrant against damage caused by exterior elements.

How are the columns approved for load?
All of our columns come with full strength and material testing provided from our local material testing facility and engineer, see individual products for exact load bearing data.

How wide should the column shaft be?
The width of columns are calculated in terms of a ratio between the base diameter of the shaft and the height. If you where looking for architecturally accuracy, a Tuscan or Doric column should be seven diameters high, an Ionic column, eight diameters high and a Corinthian column nine diameters high. For more on the “Orders of Architecture” go to www.en.wikipedia.org/wiki/Classical_order#Tuscan_order

 How should I paint my interior columns?
Bulls Eye 1-2-3®i (see site for complete details) a whole house, universal interior/exterior, water-base stain-killing primer-sealer. Excellent adhesion to glossy surfaces, including tile and enamelled trim. Low odour and easy-to-apply with great flow and levelling. Breathable, flexible acrylic formula resists blistering and peeling. This primer generally dries and is ready to expect paint within the hour.

Why should I discuss my project with you?
Speaking with us will ensure that you are getting the correct column for the job, our years of experience may prevent you from making costly errors.

Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    Astragal Trim or Base Cap 4ft

    Score: 5.00 (votes: 1)
    • US$7.50
  • Choose the product options first
    PVC Recessed Panel Newel Post

    Score: 3.67 (votes: 3)
    • US$168.00
  • Choose the product options first
    Divider for  RECESSED Paneled PVC Column

    Score: 5.00 (votes: 2)
    • US$21.00
  • Choose the product options first
    Extension for Recessed PVC Column

    Score: 3.00 (votes: 2)
    • US$38.00
  • Drag and drop me to the cart
    Georgian Two-Step, Capital/Base Upgrade

    Score: 3.67 (votes: 3)
    • US$11.00