Flexible 1" Base Shoe
Flexible Base Shoe 1" x 3/4", sold per foot (minimum 6ft required to purchase). Resinart Profile # C-SM200. Made of polyurethane resin, this trim is perfect for curved walls, and can be painted or stained on site. To save on cost, maximize the use of the rigid profile and use this flexible equivalent only for the curved portion of the project. Should require custom lengths we can have it custom ordered in - please contact our sales department for further information.
* Required Minimum 6' quantity
-
Help Finding and Installing Flexible Moulding
Find helpful tips below and look through our available catalogues. Find the matching profile for your project, with over 5000 profiles available you are likely to find a perfect match.
Flexible Base Shoe 1" x 3/4", sold per foot (minimum 6ft required to purchase). Resinart Profile # C-SM200. Made of polyurethane resin, this trim is perfect for curved walls, and can be painted or stained on site. To save on cost, maximize the use of the rigid profile and use this flexible equivalent only for the curved portion of the project. Should require custom lengths we can have it custom ordered in - please contact our sales department for further information.
* Required Minimum 6' quantity
-
Production Time3-4 weeks estimated
-
Feet Per Length8
-
Tarrif Code3925.90.0000
-
Shipping CostFree Shipping Special on Flexible Moulding orders over $250.00 or $25.00 flat rate for orders less than $250.00
Limitations to our Shipping Specials
Flexible Moulding Installation Tips
Fastening
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge.
Cutting
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.
Staining
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
Painting
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.