Elite Bayside Beadboard Kit
Elite Bayside Beadboard Kit comes either 40" or 55" high and 8ft long*, making it a good height for rooms with 8 to 10-foot ceilings.
Elite Trimworks is always looking for new ways to spice up your home. Although our old beadboard system was attractive, it needed something more in order to bring it up to date with current decorative trends. Working together with a number of interior designers, in conjunction with our own design team, we have created the "New" Elite Trimworks Beadboard Kit. We offer unique, extra-wide beads that are 2.5" wide. That's up to twice as wide as other manufacturers products. Elite beadboard planks or panels have 3 beads are and are 8" wide making them much easier to carry, cut, customize and install compared to 4' x 8' foot sheets.
The new Baseboard (bottom rail) is notched out so that the beadboard stiles can fit right into it and give you a professionally finished look. It is taller now than the original baseboard which is more elegant and stands out in any room. The Top Rail is also taller and notched out at the bottom in order for the beadboard panels to fit right in. This little notch allows the finished job to look cleaner and makes the job much easier because there is less finishing work required. We recommend an overall height of about 40" but if you prefer, you can go as high as 44". To go higher, we offer full wall kits. You can customize the overall height by cutting the stiles to the desired length. The panels are to be cut from the 8-foot lengths provided in the kits. If you prefer to have your beadboard shorter, simply cut off what you don't need.
The whole idea of packaging beadboard in this format is that it allows you to customize it fully without compromising on quality. Elite Trimworks has taken all the hours of thought and planning normally associated with undertaking a job like this and put it into one box. There is very little work required to make this look just like it does on TV. We have professionals standing by to help you with any problems or questions you may have about the product or installation. Get factory direct pricing and UPS delivery right to your door!
Wainscoting Installation Tips
Find helpful advice on what to order and how much of it to order. Please read through the instructions to see if this is the right wainscoting for you.
Elite Bayside Beadboard Kit comes in either 40" (39 ½") or 56" (55 ½") high x 8ft long* making it a good height for rooms with 8ft or 9ft ceilings. This kit contains everything you need for 8 linear feet of wall. The lower rail and beadboard planks are made from primed MDF, the Wainscot Cap trim is made from primed FJ Poplar, and the Shoe trim is made from cellular PVC for better impact and moisture resistance.
The kit consists of everything you need to cover 8 linear feet of wall:
1 x Wainscot FJ Poplar Cap, with 3/8" backset, 95"
1 x Beadboard Wainscot Lower Rail, 95"
1 x PVC Shoe Trim, 95"
The 40" kit comes with 8 x Beadboard Shiplap Plank at approx 32" (these planks may be shipped at 95" or pre-cut to accomplish the 39 ½" height)
The 55" kit comes with 12 x Beadboard Shiplap Plank at approx 47" (these planks may be shipped at 95" or pre-cut to accomplish the 54-1/2" height)
All parts are pre-packed in a single box with protective packaging for quick UPS shipping. Please see the Specification tab for the shipping special that applies to this kit. For orders over 6 kits, the order will ship via Transport Carrier.
For an overall height of 39 ½", simply cut the Beadboard Shiplap planks down to 32" high on-site, or cut the stiles shorter for a lower height. For an overall height of 58 ½" high, add 2 extra Beadboard Shiplap Planks at 8ft and cut them in half (48" high) on-site. For full wall applications, you will need 8 extra Beadboard Shiplap Planks at 8ft (total of 12 planks) to cover up to 104 ½" high.
*Actual length is 95", which is the maximum length allowed for parcel shipping.
How To Install Bead Board Photo Gallery Bayside Magazine Article Water Protection
Production TimeQuick Ship
Shipping CostCall for a Shipping Quote
Height40" (39 ½"), 55" (55 ½")
RECESSED & SHAKER WALL PANELED WAINSCOTING INSTALLATION
With no panels, the walls are used as panels
How To VIDEO with Step by Step instructions
Samples of Striaght Staircase Installations
Wainscoting on Curved Staircases
Samples of Flexible Wainscot Applications
Help Choosing Paneled Wainscot
Around Radiators & Vents
End Wainscot on Walls
Beveling Trims Back
Tall Colonial PVC Shoe Trim
Modern, PVC Shoe Trim
Colonial, PVC Shoe Trim
Shiplap Beaded Panel
Beaded Vinyl Plank