Wainscoting Rails & Panels

  • Page:
  •  
  • 1
  • 2
  •  
Per page:
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Single Craftsman Bracket in Polyurethane or PVC. 2 1/2" wide, 2 1/4" deep & 3 1/2" high.

    • US$4.70

    Score: 5.00 (votes: 2)
  • Choose the product options first

    Single Flat Panel 24" x 24" x 1/8" in primed, paint grade MDF

    • US$7.20

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart

    Primed, paint-grade MDF standard sized stile 24" x 4" x 1/2" stile for all Elite Paneled Wainscot systems.

    • US$9.00

    Score: 5.00 (votes: 1)
  • Choose the product options first

    Cherry or Maple Veneered Wainscot Shoe 3/8 x 1 3/8" x 8 ft long used for Elite Hardwood Wainscoting Systems

    • US$11.00

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart

    Flexible wainscot shoe trim made from PVC, 3/8" thick x 1 3/8" x 95 long, (8 ft.). Well suited for curved staircases. PVC trim is less than half the cost of polyurethane, but if your application required bending around very tight radiuses, we suggest that you use the polyurethane equivalent.

    • US$12.90

    Score: 5.00 (votes: 1)
  • Choose the product options first

    Single Flat Panel 20" X 44". The panel is primed, flat and made from 1/8" thick MDF board. To be cut and customized on the job site to suite any staircase layout. Instructions are included.

    • US$14.00

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart

    The Standard height for our Raised, Flat or Beaded Panel wainscoting is 37 1/2". For a 42" high application, a 5/8" thick spacer and baseboard is used to extend the height to 42". Although any baseboard or spacer will do, as a convenience, we offer this package of a 5/8" thick x 2" wide x 8ft raw MDF spacer and a 8 ft length of BB5-8 baseboard in primed MDF as shown.

    • US$15.00

    Score: 5.00 (votes: 2)
  • Choose the product options first

    Stain-grade Hardwood stile for Elite Raised or Flat Panel Hardwood Wainscot systems. Fits in between panels, 24" high, x 4" wide x 1/2" thick.

    • US$20.00

    Not rated yet
  • Drag and drop me to the cart

    Upper BB-RAIL for Elite BeadBoard wainscot systems up until 2013. In primed MDF, 8ft long, 3 1/2" high x 5/8" thick. The wainscot cap is included with our kits but sold separately. The combination of both the wainscot cap and rail forms the upper rail assembly.

    • US$20.00

    Not rated yet
  • Drag and drop me to the cart

    Primed, MDF Wainscoting Upper Rail 5" X 5/8", 8 ft long. Specifically made for either of our Recessed Panel or Panelled Wainscoting Kits. The Cap trim is optional. The combination of both the wainscot cap and rail forms the upper rail assembly.

    • US$21.00

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart

    MDF or Finger Jointed Pine Plate Rail, ⅝" x 4" by 8 feet long. Used along with either a small crown or bracket ordered separately. This rail has 2 groves cut into it so that plates won't roll off the shelf.

    • US$22.00

    Score: 5.00 (votes: 3)
  • Drag and drop me to the cart

    Stile 1/2" x 4" x 8 ft long in primed, MDF. Used for Elite Paneled Wainscot systems for stairs, accent walls & other custom applications.

    • US$23.00

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart

    Standard Raised Panel 1/2" thick x 24"x 24" Shaped, in raw MDF. Keep in mind that 1/4" on all four sides is tucked under the rails. Therefore, a 24" x 24" Panel covers an area of 23 1/2" wide.

    • US$27.00

    Score: 5.00 (votes: 1)
  • Choose the product options first

    The standard height for our Hardwood Raised or Flat Panel wainscoting is 37 1/2". For a 42" high application, a 5/8" thick spacer and baseboard is used to extend the height to 42". Although any baseboard or spacer will do, as a convenience, we offer this package of a 5/8" thick x 2" wide x 8ft raw MDF spacer and a 8 ft length of veneered baseboard 5/8" x 5 1/4".

    • US$33.00

    Score: 5.00 (votes: 1)
  • Choose the product options first

    A bigger and bolder cap since 2015. Tall Wainscot Cap Trim in primed, finger-joint poplar to fit onto a 5/8" Upper Rail for Elite Wainscot Systems, 8ft long, 2 1/2" x 1 3/8".  We offer many different back sets or dados to suit your application. Made from hardwood Poplar for better impact and water resistance than MDF.

    • US$33.00

    Score: 5.00 (votes: 1)
  • Page:
  •  
  • 1
  • 2
  •  
Per page: