Flexible, PVC Wainscot Lower Rail
Flexible, and Water Proof PVC Wall Paneled Wainscot Lower Rail or Stile 8 ¼" X ⅝", 8 ft long. Matches perfectly with our rigid (wood) recessed panel wainscoting but flexible to curve around a stair case. Cellular PVC is easy to work with; it paints, cuts, and nails just like wood.
-
Help Finding and Installing Flexible Moulding
Find helpful tips below and look through our available catalogues. Find the matching profile for your project, with over 5000 profiles available you are likely to find a perfect match.
Flexible, and Water Proof PVC Wall Paneled Wainscot Lower Rail or Stile 8 ¼" X ⅝", 8 ft long. Matches perfectly with our rigid (wood) recessed panel wainscoting but flexible to curve around a stair case. Cellular PVC is easy to work with; it paints, cuts, and nails just like wood.
Wainscot Upper and Lower Rails can be ordered in either MDF, PVC for flat applications, or PVC with notches that allow it to curve perfectly for curved stairways.
*Actual length is 95”, which is the maximum length allowed for parcel shipping.
-
Moulding CategoryBaseboards
-
Production Timequick ship
-
Feet Per Length8
-
Tarrif Code3925.90.0000
-
Shipping CostFree Shipping Special
Limitations to our Shipping Specials -
Notched for FlexiblityNo, used for straight wall, Yes, for a curved wall
Flexible Moulding Installation Tips
Fastening
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge.
Cutting
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.
Staining
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
Painting
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.