Flexible Shoe Trim 8 ft.
Flexible 1 3/16" x 7/16" Shoe Trim, 8ft long. Can be used for any curved surface. Made from a polyurethane resin, this product can be painted or stained.
Please see our Covid News for the most current news relating to availability, closures, and lead times.
Help Finding and Installing Flexible Moulding
Find helpful tips below and look through our available catalogues. Find the matching profile for your project, with over 5000 profiles available you are likely to find a perfect match.
Flexible 1 3/16" x 7/16" Shoe Trim, 8ft long. Can be used for any curved surface. Made from a polyurethane resin, this product can be painted or stained. Contact us should you require a custom length (minimum 6ft length required to order).
To save on costs, maximize the use of the rigid MDF profile and use the flexible equivalent only for the curved portion of the project. The maximum per one length we can supply is 12 feet; for orders over 12 feet, it will be made in multiple sections. We stock this profile in 8ft lengths only, but should require custom lengths we can have it custom ordered in - please contact our sales department for further information.
We also offer this matching profile in MDF
We are Open
Online ordering, manufacturing & shipping.
Showroom & pick-up's by Appointment.
We are currently experiencing a high demand of orders and longer than expected lead times from our vendors. Our team is working hard to process all orders, as soon as possible; however, we must maintain safe working standards, along with social distancing measures, to ensure their and your safety are our highest priority.
Anticipate delays and longer than normal lead times. Thank you for your understanding during this challenging time.
Note our Showroom is open, by appointment, we are open Mon-Fri 9 - 5 and Saturdays 10 - 3 EST for scheduled showroom appointments and scheduled pick ups.
We are always available for online ordering, and continue shipping orders and manufacturing. Our team members are here ready to assist you with your project needs.
We look forward to hearing from you!
Production TimeQuick Ship
Feet Per Length8
Shipping CostFree over $100.00, or $19.00 flat rate for orders less than $100.00
Limitations to our Shipping Specials
Flexible Moulding Installation Tips
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge.
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.