Flexible Large Chair Rail 8 ft
Large Flexible Chairail 3 3/16" x 1 1/8" thick, 8/12 ft in flexible polyurethane. Although yellowish in color, it accepts primer and paint the same way as MDF does. Perfect for curved staircases, curved walls, arched windows or arched openings. When installed next to our LCR trim and painted forms a seamless joint. To save on costs, maximize the use of the rigid MDF profile and use the polyurethane equivalent only for the curved portion of the project. Most popular for making Applique wainscoting as a wall treatment. This trim can also be used as a stand alone trim.
-
Help Finding and Installing Flexible Moulding
Find helpful tips below and look through our available catalogues. Find the matching profile for your project, with over 5000 profiles available you are likely to find a perfect match.
Large Flexible Chairail 3 3/16" x 1 1/8" thick, 8/12 ft in flexible polyurethane. Although yellowish in color, it accepts primer and paint the same way as MDF does. Perfect for curved staircases, curved walls, arched windows or arched openings. When installed next to our LCR trim and painted forms a seamless joint. To save on costs, maximize the use of the rigid MDF profile and use the polyurethane equivalent only for the curved portion of the project. Most popular for making Applique wainscoting as a wall treatment. This trim can also be used as a stand alone trim.
-
Production TimeQuick Ship
-
Feet Per Length8ft or 12 ft
-
Inches3 1/2"
-
Tarrif Code3925.90.0000
-
Shipping CostFree Shipping Special on Flexible Moulding orders over $250.00 or a $25.00 flat rate for orders less than $250.00
Limitations to our Shipping Specials -
Length8 Ft., 12 Ft.
Flexible Moulding Installation Tips
Fastening
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge.
Cutting
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.
Staining
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
Painting
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.