Flexible Step Casing 3 1/2"
Flexible Step Casing - 3 1/2" x 3/4" priced per foot. Made from flexible polyurethane resin, this casing is perfect for arched windows and doorways, and can be painted or stained on site. To save on cost, maximize the use of the rigid profile for the sides of the doorway/window, and use this flexible equivalent only for the curved portion of the project.
* Required Minimum 6' quantity
Please see our Latest Covid News for the most current news relating to availability, and lead times.
Help Finding and Installing Flexible Moulding
Find helpful tips below and look through our available catalogues. Find the matching profile for your project, with over 5000 profiles available you are likely to find a perfect match.
Flexible Step Casing - 3 1/2" x 3/4", priced per foot. Made from flexible polyurethane resin, this casing is perfect for arched windows and doorways, and can be painted or stained on site.
To save on cost, maximize the use of the rigid profile for the sides of the doorway/window, and use this flexible equivalent only for the curved portion of the project. We will need to know the width and rise of your archway in order to determine the radius and linear footage required for the archway. Please contact us for information.
We also offer this matching profile in MDF.
* Required Minimum 6' quantity
Latest Covid News
We are back up and running!
We are still experiencing higher demand for orders and longer-than-expected lead times due to worldwide supply chain problems. Our team is working hard to produce all orders, as soon as possible. Anticipate delays and longer-than-normal lead times. Thank you for your understanding during this challenging time.
We must continue to maintain safe working standards, along with social distancing measures, to ensure everyone's safety. We look forward to seeing you back in our showroom or hearing from you!
Production TimeMade to Order, 3-4 weeks estimated
Feet Per Length1
Shipping CostFree over $250.00, or $25.00 flat rate for orders less than $250.00
Limitations to our Shipping Specials
Flexible Moulding Installation Tips
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge.
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.