Flexible Applique Trim 10 ft.

Score: 4.60 (votes: 5)
No reviews.

Flexible 1-3/4" x 5/8" Applique Trim, 8/10 ft. long.  Can be used for any curved surface. Made from a polyurethane resin, this product can be painted or stained. Perfect for curved staircases, curved walls, and arched openings. When installed next to our rigid MDF applique trim, and painted it forms a seamless joint. 

  • US$48.51
Quantity:  
OR
  • Help Finding and Installing Flexible Moulding

    Find helpful tips below and look through our available catalogues. Find the matching profile for your project, with over 5000 profiles available you are likely to find a perfect match.

  • SKU
    FLEX-APPL-10
  • Weight
    4.65 lbs

Flexible 1-3/4" x 5/8" Applique Trim, 8/10 ft. long.  Can be used for any curved surface. Made from a polyurethane resin, this product can be painted or stained. Perfect for curved staircases, curved walls, and arched openings. When installed next to our rigid MDF applique trim, and painted it forms a seamless joint. 

To save on costs, maximize the use of the rigid MDF profile and use the flexible equivalent only for the curved portion of the project. The maximum per one length we can supply is 12 feet;  for orders over 12 feet, it will be made in multiple sections.

We offer this matching profile in MDF

    • SKU
      FLEX-APPL-10
    • Weight
      4.65 lbs
  • Production Time
    Quick Ship
  • Feet Per Length
    12
  • Inches
    1 3/4"
  • Tarrif Code
    3925.90.0000
  • Shipping Cost
    Free over $250.00, or $25.00 flat rate for Flex. orders less than $250.00
    Limitations to our Shipping Specials
  • Length
    8 ft.

Flexible Moulding Installation Tips

Fastening
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge.

Cutting
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.

Staining
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.

Painting
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.

Customer reviews
Average rating:
4.60 (Votes: 5)
Rating of votes (5)
5
 
 
4customers
4
 
 
0customers
3
 
 
1customers
2
 
 
0customers
1
 
 
0customers
 
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Related products