Prehung Door Services
Referred to as “Door Kits” or “Pre-Hanging"
Although many professional finish carpenters prefer to do their door machining and pre-hanging on site, others prefer the convenience of installing doors that have already been pre-hung. By having your doors pre-hung in the factory, you are guaranteed a perfect, smooth closing door every time, regardless of the level of experience of the installers. When ordering pre-hung doors, you will need to know your door swing and the thickness of the wall. A wall built with 2x4’s requires a jamb 4 ⅝” thick. Wider or thicker walls are mostly likely built using 2x6’s, they require a jamb 6 ⅝” wide. Our Pre-hanging service includes everything shown on the illustration (except the door). Please note this is a knock-down service for easy of shipping, and these do not come fully assembled as they should be assembled on site.
|Download Handling Sheet PDF||Door Terms and Conditions|
With our wide selection of hinges, you are sure to find the finish that will match your door knob or lever perfectly. Our pre-hung door kits do not include: Shims, door lock, paint, or any additional screws other than what is required for the hinges. For double door frames, multiply the full door system price by two. Please note that, all our pre-hung doors are non-refundable and non-returnable. We also require a door machining sheet to be filled out by all our clients in order to have the doors machined accurately to your specifications. We only offer this pre-hanging service with our doors.
Fee to cut door to size. To a maximum of 1” in total, centred ½” from the top and ½” from the bottom. We cut an equal amount from the top as we do the bottom. We do not cut sides of the doors. Ask about custom made doors or flush doors for uncommon sizes.
Fee to cut door to size. For cuts over 1” in total, the entire wood support must be remove and re-inserted (re-blocked) on both top and bottom of door. We cut an equal amount from the top as we do the bottom, unless specified otherwise, in which signed specifications must be provided prior to production. We do not cut sides of doors. Cutting doors more than 1” typically voids the manufactures warranty. Ask about custom made doors or flush doors for the uncommon sizes. Note: WE CAN NOT RE-BLOCK SOLID WOOD OR SOLID CORE DOORS