Custom Milled MDF BeadBoard Sheets
Choose from a wide variety of bead types and thickness

Elite Trimworks offers MDF Beadboard Sheets which can be used for Ceilings, Wall Applications or Cabinetry. The Beadboard or V-Grooved Sheets can be ordered in varies panel thickness and lengths.  The beads or grooves can be ordered in various widths and styles.  The rustic "V" Groove gives a "Wide Plank" appearance. Using the predetermined spacing insures that the beads or grooves lineup end to end for seamless wall applications.

Needless to say, we can make these sheets in any Oak, Maple, Cherry, Mahogany etc., veneered MDF core, particle core or any board that you like. Additional images of these beaded boards can be found in the Photo Gallery

If full size sheets are required, call us to make transport shipping arrangements. FedEx or UPS only allows us to send a maximum size of 30"H x 48"W panels. Whole sheets must be sent on a skid using a Transport Truck at a higher shipping cost; this type of shipment only makes sense if you plan to order 10 sheets or more. If you have an application where 8' tall material is necessary, you may want to look at our Plank Beadboard options. The planks go together using a Shiplap joint which means that each plank overlaps the last to create a seamless joint. The planks are available in both Paint Grade and Stain Grade (Oak, Maple and Cherry). The planks are ideal for smaller jobs that may not require the use of a full sheet of beadboard but still require the height of a full size sheet.

Should you decide to use 3/8" thick sheets, with any bead type, they will match perfectly with our BeadBoard Rail Package that includes a pre-milled upper and lower rail, cap and shoe trim for a very rich looking wainscot beadboard application. For those of you considering installing beadboard on an un-even or tiled surface, using this custom made sheet Beadboard with the rail package will give you stunning results.    

BBsheets2.jpg

Per page:
Drop items here to shop
Product has been added to your cart
  • Choose the product options first

    The fee charged for cutting any board of wood, MDF or PVC one way at any length, PER CUT. The sheets or panels will be cut square as per your instructions. Accuracy will be within 1/8” of an inch. Cut offs or waste will be shipped with your order unless specified otherwise.  The maximum length of cut is 12 feet.  Contact us for costing to cut longer sheet.

    • US$2.50

    Score: 5.00 (votes: 2)
  • Interior - Plank Sample Pack
    • Free
    Choose the product options first

    Sample Pack of both Tongue & Groove and Shiplap Planks used for interior ceilings and wall applications.

    We offer free shipping for this sample pack within major cities in Canada and the Lower 48 States.

    Limit of one sample per customer.

    • US$20.00

    Score: 4.20 (votes: 5)
  • Beadboard / Wainscoting Sample Pack
    • Free
    Drag and drop me to the cart

    A sample package of Planks and Trims used for our Beadboard Wainscoting Kits that includes: 

    -2-Three-Beaded Shiplap Plank in Primed MDF
    -2-Shiplap, 6" Deep V-Grooved, Wide Plank in Primed MDF
    -2-Beaded, Tongue & Groove Planks, in White Vinyl
    -1-Primed, MDF Lower Rail / PVC Shoe combination
    -1-Poplar Cap with a ⅜" back set to accommodate both of our MDF planks

    If you do not see a specific item that you are looking for listed, contact us and at no additional charge and we can send other related samples like: Beaded, V-Grooved or Nickel Gap Sheets or Panels. 

    Limit of one sample per customer.

    • US$20.00

    Not rated yet
  • Choose the product options first

    One sheet of Raw MDF. Being popular, we carry lots of stock for fast shipping. MDF sheets are produced with a state-of-the-art systems resulting in better consistency that allows for higher quality fabrications.

    Choose from any of our in-stock sheets or order in any size you like. MDF sheets are available 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", and up to two inches thick. We can bring in common sheet sizes like 4x8, 4x10, 5x12 and 4x12 foot in a matter of days.

    • US$26.50

    Score: 5.00 (votes: 2)
  • Choose the product options first

    Nickel Gap (or Channel Groove) Raw MDF Sheet, with 4" / 6" / 8" on-centre channel. Each sheet is 4' wide, with an option to choose the length (8ft / 10ft / 12ft), and the thickness (3/8" / 1/2" / 5/8" / 3/4"). The channel groove its approximately 1/4" wide and 3/16" deep. 

    These sheets can be used for Walls, Ceiling, Backsplash, or Cabinet applications.

    Choosing the Channel Direction: Run along the LENGTH of the board, means the channel will run along the 8ft / 10ft / 12ft  length of the sheet. Run along the WIDTH of the board, means the channel will run along the 4ft width of the sheet.

    Whatever way the channel direction runs, each side of the board will have a shiplap edge to form a seamless joint when  using multiple sheets together.

    We can customize these sheets in-house. Please Contact Us for a quote.

    • US$55.46

    Score: 5.00 (votes: 1)
  • Choose the product options first

    V-Groove Raw MDF Sheet, with 3" / 4" / 6" on-centre Grooves. Each sheet is 4' wide, with an option to choose from various lengths and thicknesses. The V-Groove its self is approximately 7/32" wide and 7/64" deep. 

    These sheets can be used for Walls, Ceiling, Backsplash, or Cabinet applications.

    Choosing the Groove Direction: Run along the LENGTH of the board, means the groove will run along the 8ft / 10ft / 12ft  length of the sheet. Run along the WIDTH of the board, means the groove will run along the 4ft width of the sheet.

    Whatever way the groove direction runs, each side of the board will have a shiplap edge to form a seamless joint when  using multiple sheets together.

    We can customize these sheets in-house. Please Contact Us for a quote.


    • US$59.00

    Score: 4.00 (votes: 2)
  • Choose the product options first

    Standard Bead Raw MDF Beadboard Sheet, with 2" / 3" / 4" / 6" on-centre Beads. Each sheet is 4' wide, with an option to choose the length (8ft / 10ft / 12ft), and the thickness (3/8" / 1/2" / 5/8" / 3/4").

    These sheets can be used for Walls, Ceiling, Backsplash, or Cabinet applications.

    By default, the Bead will run along the LENGTH of the board. Each side of the board will have a shiplap edge to form a seamless joint when using multiple sheets together.

    We can customize these sheets in-house. Please Contact Us for a quote.

    • US$62.00

    Score: 5.00 (votes: 1)
  • Choose the product options first

    W-Bead Raw MDF Beadboard Sheet, with 2" / 3" / 4" / 6" on-centre Beads. Each sheet is 4' wide, with an option to choose the length (8ft / 10ft / 12ft), and the thickness (3/8" / 1/2" / 5/8" / 3/4").

    These sheets can be used for Walls, Ceiling, Backsplash, or Cabinet applications.

    By default, the Bead will run along the LENGTH of the board. Each side of the board will have a shiplap edge to form a seamless joint when using multiple sheets together.

    We can customize these sheets in-house. Please Contact Us for a quote.

    • US$62.00

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart

    Rail Pack, all the rails you need for 8 feet of our Elite Beadboard system with 3/8” thick planks or 3/8' thick sheets in paint grade. This rail pack consists of: 1- 8ft length of: lower rail/baseboard combination; FJ Poplar Cap with 3/8" back set; and a PVC shoe trim for water resistance. The top cap and bottom rail adds 7 3/4" to the height of either the sheets or planks.

    If you are using 8 foot long planks and cutting them into 3 - 32" stiles for wainscoting, an overall height of 39.5" can be achieved.

    • US$88.83

    Score: 5.00 (votes: 1)