10/20 RAISED Panel Tapered PVC Column Wrap
Column Installation Tips & FAQs
Find helpful tips, specifications and installation advice on how to install our Columns. Read through the instructions to see if this is the right product for you.
10/20 RAISED Panel Tapered PVC Column Wrap - with crisp, clean lines. These PVC column wraps are made to wrap around an existing post support, they are not load bearing. Being made with premium "Free Rise" cellular PVC, our wraps are quick and easy to install as well as lightweight, strong and paintable. They hold up to warping, shrinkage, decay, insects and they don't need to be painted. The Shaft is made from both ⅜" and 1/2” thick PVC glued together making the panels a total of ⅞" thick making this a very solid column.
The Shaft is made from 3/4" thick and the panels are carved in place with robot precision. These panels use lock mitre joints for easy assembly and are 19 3/4” at the bottom and 9 3/8" at the top, with the minimum opening being about 8” square.
This column comes with a Georgian Capital and Base (shown) which adds approximately 4 ½" to both the top and bottom footprint of the shaft. The optional Box (Craftsman) Cap and Base are both about 3" high and only adds 1 ¼” to the shaft thickness. We recommend either the Box Base or Box Capital for applications that have limited space.
Column Shaft only 10/20
Shaft with Georgian Cap / Base
Shaft with Box Cap / Base
The shaft is shipped in four easy to trim panels that are shipped flat. We include 3 oz. of PVC adhesive, tape, fastening hardware, mounting cleats and installation instructions. All you need is a chop saw and basic carpentry tools to install.
Available up to 12 feet tall, contact us for pricing and specifications.
As a no-cost option, we can make the column any height, just order the next size up. No need for accuracy more than 1/2” as the capital, which fits over the shaft can easily add 2” to the height of the column shaft.
A Tuscan cap and base set, contact us for availability and pricing.
This column can also be ordered as a pilaster to go up against a wall at 60% the cost of the column.
We can make these column in almost any size, call for pricing.
*Shipping Specials only apply to the lower 48 states.
Production TimeMade to order, 5-10 days plus transit time.
Shipping CostFor Columns 6ft and under: Free Shipping on orders over $500 or $49 flat rate. Call for a transport shipping rate for taller columns.
Limitations to our Shipping Specials
Height48" or 4', 54" or 4' 6", 60" or 5', 66" or 5' 6", 72" or 6', 84" or 7', 96" or 8'
Choose your CapitalGeorgian, Box
Choose your BaseGeorgian, Box
COLUMN FREQUENTLY ASKED QUESTIONS
Are you the manufacturer?
Elite Trimworks does produce most of our interior columns and most exterior columns. We specialize in manufacturing PVC Columns.
Are your columns load bearing?
Yes, all of our round wood and Fiber Cast columns are load bearing. Refer to website for the load bearing capability of the desired column.
If my wood columns are split, what type of adhesive do I need to reassemble them?
To reassemble a split column, a high quality wood glue adhesive should be used. This product can be found at any hardware or construction-supply provider.
How do I secure a split column to a wooden or metal post?
Depending on your application, there are several ways to hold a column in place when used for decoration purposes only. One of the most common ways to hold a column in place is to use standard "L" brackets on the bottom and top of the column's shaft. The Tuscan Base and Capital hide this method of installation. If being assembled around a wooden post, a common way to secure the column is by using wood shims. The shims should fit snugly between the column shaft and the post for proper stability. Be sure to visit our website for further column installation instructions.
Can I trim my columns to a lower height?
Yes. If it is a non-tapered column, 1/3 of the shaft height can be trimmed without affecting the fit of the base and capital. Trimming must take place from the bottom of the shaft only!
How are the columns shipped?
Columns measuring up to 8 feet are shipped using UPS. Any column longer than 8 feet must be shipped using a common carrier (Tractor Trailer) and different shipping rates apply.
What happens if my columns arrive damaged?
Depending on shipping method, different rules apply. For instance we do not allow UPS shipments to be refused. For transport shipments, it needs to be indicated on the Bill of Lading (BOL) and we need to be contacted right away. For complete details please see our Terms & Conditions
Is Elite Trimworks competitive with their pricing?
You bet ya! Our 20,000 square foot warehouse allows us to buy in volumes. Half of the columns we sell are made in-house and we pass on the savings to you. We are confident that our prices are some of the best out there. Give us a call and find out for your self.
Can I install the columns myself or will I need a contractor?
Columns less than 9 feet are easy to manage for proper installation if you are handy with basic tools required. Our website has downloadable instructions for installation. Columns over 9 feet high are best managed with the assistance of an experienced contractor.
Can columns go around poles and beams?
Any column is capable of being split in order to accommodate your design. The rules are as follows: Round Beams take overall diameter; Square Beams, take diagonal measurement from top to determine width. Refer to our specs for inside clearance of the shaft to determine proper size column needed.
Do capital and base add any height to the column?
When you order a round wood column the capital and base are factored into the overall finished height of the column. When ordering the Fiber Cast columns, the capital and base are pieces that fit around the column (see image below) and so they do not play a part in adding height to the finished column.
Are the capitals load bearing?
Decorative capitals are strictly for decorative purposes and are not load bearing. The wood or MDF capitals that come standard with the wooden columns are load bearing.
Are your exterior columns insect and decay resistant?
All our exterior columns are engineered and tested to warrant against damage caused by exterior elements.
How are the columns approved for load?
All of our columns come with full strength and material testing provided from our local material testing facility and engineer, see individual products for exact load bearing data.
How wide should the column shaft be?
The width of columns are calculated in terms of a ratio between the base diameter of the shaft and the height. If you where looking for architecturally accuracy, a Tuscan or Doric column should be seven diameters high, an Ionic column, eight diameters high and a Corinthian column nine diameters high. For more on the “Orders of Architecture” go to www.en.wikipedia.org/wiki/Classical_order#Tuscan_order
How should I paint my interior columns?
Bulls Eye 1-2-3®i (see site for complete details) a whole house, universal interior/exterior, water-base stain-killing primer-sealer. Excellent adhesion to glossy surfaces, including tile and enamelled trim. Low odour and easy-to-apply with great flow and levelling. Breathable, flexible acrylic formula resists blistering and peeling. This primer generally dries and is ready to expect paint within the hour.
Why should I discuss my project with you?
Speaking with us will ensure that you are getting the correct column for the job, our years of experience may prevent you from making costly errors.